tousek
/ E_PASS-838_02 / 22. 10. 2018
- 9 -
3f. Adjusting the limits
Montage
• The barrier operator is equipped with two adjustable limit
stop bolts, one for
OPEN (AO)
and one for
CLOSED (AG)
position
.
• The gearing lever
(G)
is being defined in its turning move
-
ment by these two limit stop bolts in the end positions open
and close. The integrated speed sensor registrates when it
reaches one of the limits, whereupon the control board turns
off the motor.
• The switching time and also the boom limit positions can be
defined by bolting in or out the limit stop bolts.
Note
• Please note that when the limit stop bolts are being
adjusted (AO or AG) the limit positions are being
learned in.
• Choose in control board menu of ST 80 under
„DIAGNOSIS / delete position“ the value „YES“ .
T
AO
AG
G
IMPORTANT
• The end position of the barrier must take place according to the above services mentioned above description.
•
Never use a support fork or pendulum support as a limit. These serve only to discharge of the bar!
•
The company Tousek Ges.m.b.H. accepts no liability for damages resulting from such a misuse!
