tousek
/ E_FOLD330_43300306 / 31. 07. 2019
- 5 -
Before mounting the operator please make sure that the driving shaft (
a)
and pivotal point of the gate (
b)
are at a distance of
10 cm
from each other.
Insert the drive sleeve in the crown shaft of the operator.
Insert the connecting shaft and cut to length if necessary.
Determine the lenght
X
of the telescopic arm with opened leaf.
If necessary shorten the telescopic arm (both: forming tube
and flat iron)
To avoid tensions, when in the retracted state, the lenghts of
the telescopic arm has to be approx. 5cm shorter than the
lenght mentioned above.
580mm
with 1,2m leaf width
centered on the gate leaf
2. Mounting
Folding gate operator FOLD 330/L-R
a
10cm
b
Defining mounting point for the telescopic arm:
The mounting bracket ist to be placed 580mm away from the hinge of the second leaf. If the leaf width is bigger than 1,2m
(from hinge to hinge, middlepoint to middlepoint) please position and fix the mounting
bracket centered on the gate leaf.
X
