tousek 11410010 Connection And Installation Manual Download Page 3

tousek

  /  E_FOLD330_43300306  /  31. 07. 2019 

- 3 -

1.  General information 

Folding gate operator FOLD 330/L-R

Electrohydraulic folding gate operator

•  230Va.c. Folding gate operator with hydraulic blockage system
•  for double wing folding doors
•  Special case:  Use as swing gate operator with  

max. wing width of 1.3m

•  with emergency release
•  closed hydraulic system
•  opening and closing force can be adjusted separately
•  with mounting accessories

• 

General features 

The operator TOUSEK 330 consists of a  massive aluminium block with a closed electrohydraulic system.

Due to its precise design and construction the oil pump is extremely quiet. 

The operator FOLD 330 is to be mounted on the gate leaf. It is therefore also ideal for subsequent installation. 

Motors with hydraulic lock normally don´t need the electric lock.

In order to achieve a fixed locking of the door in the end positions, also in case of  blocking operators, it can be necessary to use an 

additional locking mechanism, such as an electronic lock (depending on fitting situation).

Motors without hydraulic lock need an electric lock to fix the doors in the closed position.

Technical data

Gate operator FOLD-330/L-R AEB   (/L: left operator, /R: right operator)

Power supply

230Va.c. 50Hz

Rotation angle

190°

Power consumption

150W

Duty ciycle operating mode S3

40%

Max. leaf width

1,3m

Blocking in the end positions

Angular velocity

11,4°/s

Article nr.

left (/L)

11410010

Torque

280Nm

right (/R)

11410020

Other features

opening and closing force freely adjustable • closed hydraulic system • emergency release

Accessories

Telescopic arm, key switch, radio systems, buttons, photocells, safety edges and lights

Summary of Contents for 11410010













Reviews: