- 2 -
tousek
/ E_FOLD330_43300306 / 31. 07. 2019
Important warning and safety notes
• The installation and operating instructions form an integral part of the product “gate operator”. They have been specifically
written for professional and should be carefully read in their full length before carrying out the installation. They refer to
the gate operator only, not to the “automatic gate”. After the installation this manual has to be handed over to the user.
•
Installation, connection, adjustments, putting into operation, and servicing may only be carried out by trained
professionals in full accordance with these installation- and operating instructions.
• Before carrying out works at the gate-system, please turn off the power supply.
• The EU Machine Directive, laws and rules concerning the prevention of accidents, and laws and standards which are in
force in the EU and in the individual countries have to be strictly followed.
• The TOUSEK Ges.m.b.H. cannot be held liable for any claims resulting from disregards of the laws and standards in
force during the installation and operation.
• The packaging materials (cardboard, plastic, EPS foam parts and filling material etc.) have to be properly disposed of
in accordance with the applying recycling- and environmental procection laws. They may be hazardous to children and
therefore have to be stored out of children´s reach.
• The product is not suitable for installation in explosion-hazardous areas.
• The product may only be used in accordance with its original purpose, for which it has been exclusively designed, and
which is described in these installation and operating instructions. The TOUSEK Ges.m.b.H. rejects any liability if the
product is used in any way not fully conforming to its original purpose as stated herein.
•
Children have to be instructed, that the gate facility as well as the belonging parts may not be used improperly,
e.g. for playing.
Furthermore handheld transmitters have to be kept in safe places and other impulse emitters as buttons
and switches have to be installed out of children‘s reach.
• Before beginning with the installation the installer has to make sure that all mechanical components of the gate facility, like
carrier profile/rail, gate frame and panels, guiding elements etc. are sufficiently supportive and resistant for the purpose
of gate automation.
• All electrical installations have to be made in full conformity with the applying rules and laws (e.g. using a fault current
circuit breaker, proper grounding etc.).
•
An all-pole disconnecting main switch with a contact opening-gap of minimum 3 mm has to be foreseen.
• The electric motor heats up during operation. Therefore the device should only be touched after it has cooled off.
•
After installation the proper function of the gate facility and the safety devices has to be checked!
• The TOUSEK Ges.m.b.H. rejects any liability for claims resulting from usage of the product in combination with compo-
nents or devices which do not fully conform to the applying safety laws and rules.
• Only original spare- and replacement parts may be used for repair of the product.
• The installer has to inform the user about all aspects of the automatic operation of the complete gate facility, as well as
about emergency operation. The installer further has to supply to the user all instructions relating to the safe operation
of the gate facility. The installation and operating instructions also have to be handed over to the user.
• Please notice that the warranty will not be applicable if the label with the engine number has been removed or
damaged!
Maintenance
•
Maintenance works may only be carried out by qualified personnel.
•
Check the proper function of the emergency release mechanism periodically.
•
Check if all mounting screws are securely fastened periodically.
•
Remove dirt deposits from the operator and from the gear rack periodically.
•
Maintenance has to be carried out according to the gate builder`s/installer`s instructions.
This manual is the sole property of the TOUSEK Ges.m.b.H. and may not be made available to competitors. All rights reserved. No part of it may be reproduced without our prior
written permission. We will not accept liability for any claims resulting from misprints or errors. This edition of the manual replaces all earlier publications of the same.
