Hawk II User Guide Rev3 23-03-12 Copyright © 2012 TouchStar Technologies Ltd
pg. 35
Screen Protectors
Your Hawk II is fitted with a durable TouchPanel but as this is the only user
interface it has also been fitted with a Screen Protector for extra
protection. If the Screen Protector gets scratched or damaged it can be
thrown away and replaced without the need for the device being
returned to TouchStar Technologies.
Ordering and Fitting a Screen Protector
Screen protectors for your Hawk II can be ordered from TouchStar
Technologies – please reference part number 693032 when ordering.
1)
Remove the protective sheet from the Screen Protector. This is the
side which faces down towards the Hawk II.
2)
Hold the Screen Protector in one hand and squeeze slightly so that
it arches in on itself.
3)
Feed it between the Upper Case and Touchpanel. Press it in until it
touches the Touchpanel Gasket.
4)
Work one of the long edges so that it fits in between the Upper
Case and Touchpanel.
5)
For the last step carefully work the final corner between the Upper
Case and Touchpanel.
NOTICE:
DO NOT crease the Screen Protector. If this happens
remove it and replace with a new Screen Protector.
To remove a Screen Protector carefully insert a stylus under the corner of
the screen protector, lifting the Screen Protector away from the
touchpanel. Remove fully and discard.