Hawk II User Guide Rev3 23-03-12 Copyright © 2012 TouchStar Technologies Ltd
pg. 13
Using the Battery
If you are using your Hawk II for the first time you must install and charge
the battery. Once the battery is charged the Battery Status Utility will
display its status.
NOTICE:
Do not use your Hawk II until the battery has been
charged for at least 4 hours. When charging, in the taskbar a
lightening symbol will appear.
Installing and Removing the Battery
To install the battery:
1)
If a SIM card is required, make sure it is fitted
2)
Align the tongue on the top edge of the battery with the
corresponding slot in the battery bay.
3)
Pivot the battery down until the battery is fully inserted. Push battery
clip down to lock.
NOTE:
As soon as the battery is inserted the Hawk II will power up.
To Remove the Battery:
1)
Insert tool in slot to
lift locking tab.