9
PART 2. BREWING A CUP
Ready to Brew Your First Cup
1. Make sure the brewer is powered ON. Place a cup or mug on the Drip Tray.
2. Pull on the Latch to open the Cover. (Fig. 7) Insert a desired Pod into the Red Cup Holder. (Fig. 8)
NOTE:
DO NOT remove the foil lid or puncture the Pod. (Fig. 8) When using a smaller cup, the Drip Tray may be inserted into the Upper Slot to minimize
splattering of coffee. (Fig. 7)
CAUTION:
There are three sharp Needles that puncture the Pod: a top Needle underneath the Cover and two bottom Needles in the Red Cup Holder. To
avoid risk of injury, do not put your fingers in the Red Cup Holder. (Fig. 8)
3. Close the Cover by pressing down on the Cover Handle. (Fig. 9)
4. Press on the desired cup button (6, 8 10, 12, 14, 16, or 18). (Fig. 9) Recommendation: Use 6-10 cup size with regular K-Cup® portion pack; use 10-14
cup size for our XBold cups; use 14-18 cup size for our XLarge cups; and use Carafe button with our Refill Jumbo Cup and Carafe.
Touch Coffee & Beverages is NOT affiliated with Keurig, Inc. Keurig® and K-Cup® are register trademarks of Keurig, Inc.
Fig. 7
Fig. 8
Fig. 9