8
PART 2. BREWING A CUP
Setting Up Your Brewer (Continued)
CAUTION:
DO NOT pull the Latch to open the Cover during the brewing period. (Fig. 4)
CAUTION:
Extremely Hot Water! (Fig. 5)
8. With the cover closed, press the 10 oz Button to start the brewing cycle. (Fig. 5) The brewing indicating light on the upper right corner will stay ON while
the brewer is warming up. Note that the brewer will pump the water to the Water Tank while warming up. This is normal and it may take up to 30 seconds
to warm up from a cold start. The brewing indicating light will start to blink when the brewing cycle starts.
CAUTION:
DO NOT remove the mug until the brewing indicating light stops blinking.
9. Once the brewing is done, remove the mug and pour the hot water into the sink. Discard the hot water and repeat cleansing by repeating the brewing
cycle at least two (2) more times. (Fig. 6)
10. The one-time set-up process is now complete and the brewer is now ready.
Fig. 4
Fig. 5
Fig. 6