Touch-Plate® Lighting Controls
Nexus System Manual
Page 15
www.touchplate.com
Troubleshooting Guide
If no response occurs when the system is powered up, use the following steps to identify the
problem.
1. Look for the LED indicator to be blinking on the Nexus.
a. For the indicator to be blinking, power has to be correctly brought to the system.
b. If the LED indicator is not blinking, confirm power connections and then contact
the factor y for assistance.
If the communications LED does not stop flashing, the LEDs on the control stations, and/or output
boards do not flash.
1. Verify that the wiring is correct.
2. Verify that all devices are connected to power.
3. Verify the baud rate on the Nexus.
