Toua GFN3490CH, Safety Operating Manual

Page: 13 / 24

11
③
Insert the stem of fuel cell into the hole of
adaptor.
④
Close the cell cover.
⑤
Lock up the latch .
Fuel Cell
Stem
Stem
Adapter
Cell Cover
(2) Installing the battery.
Do not operate the push lever or trigger while installing
the battery.
Make sure the battery indicator light is flashing green.
If the battery indicator light is flashing red, the battery
doesn't have enough power and it needs to be charged.
BATTERY INDICATOR LIGHT
Flashing GREEN: Enough power remaining
(The light turns steady during operation).
Flashing RED: Insufficient power remaining
(The light turns steady during operation).
(3) INSERT FUEL CELL INTO NAILER.
①
Pulling the latch and open the cell cover.
②
Insert the fuel cell into nailer.
Latch
Cell Cover
(4) Remove the finger from the trigger and press the
push lever against the workpiece with pulling
backward the feeder knob, motor fan start.
■ THE NAILER MUST NOT OPERATE.
(5) Separate the push lever from the workpiece.
Next, point the push lever downward and leave
workpiece, pull the trigger and then wait in that
position for 5 seconds or longer.
If burst, this means the push lever have not
replacing, the cylinder have not open, nailer is
anomaly.
■ THE NAILER MUST NOT OPERATE.
Battery Indicated Light
Handle
Battery Pack
inse
rt
Do not pull
the trigger
Nail Feeder
Depress push
lever against the
work piece
Fuel Cell