background image

5

                       Table 1

    RECOMMENDED MINIMUM AWG SIZE FOR
    EXTENSION CORDS FOR BATTERY CHARGERS
    AC Input Rating Amperes           AWG Size of Cord

    Equal to or        but less than       

  

Length of Cord, Feet (Meter)

    greater than

                        

2.5(7.5) 50(15)  100(30)  150(45)

             0                        2                 18          18           18           16
             2                        3                 18          18           16           14
             3                        4                 18          18           16           14

     If the input rating of a battery charger is given in
     watts rather than in amperes, the corresponding
     ampere rating is to be determined by dividing the
     wattage rating by the voltage rating-for example:
         1,200 watts/120volt=10 Amperes

9.  Do not operate battery charger with damaged

     cord or plug

should replace them immediately.

10. Do not operate battery charger if it has received

     a sharp blow, been dropped, or otherwise damaged
     in any way; take it to a qualified serviceman.

11. Do not disassemble battery charger; take it to a

     qualified serviceman when service or repair is
     required.
     Incorrect reassembly may result in a risk of
     electric shock or fire.

12. To reduce risk of electric shock, unplug charger

     from receptacle before attempting any maintenance
     or cleaning. Removing the battery will not reduce
     this risk.

13. Please read this Manual before using the battery

     charger.

IMPORTANT SAFETY INSTRUCTIONS FOR  USE

OF THE BATTERY AND BATTERY CHARGER

You must charge the battery before you use the

Nailer. Before using the model503.1.16.001.XX
battery charger, be sure to read all instructions and

cautionary statements on the battery and in this

manual.

R EM EM BER

:  ONLY USE APPOINTED BATTERY

TYPE503.1.12.001.02.

OTHER TYPES OF BATTERIES MAY BURST

AND CAUSE INJURY!

Follow these instructions to avoid the risk of injury:

WARNING

Improper use of the battery or battery charger

can lead to serious injury. To avoid these injuries:

1. 

DO NOT

 disassemble the battery.

2. 

DO NOT

 incinerat e  the  batt ery,  even if it is

                   damaged or is completely worn out.
                   The battery can explode in a fire.

3.  

DO NOT

 short-circuit the battery.

4.  

DO NOT

 insert any objects into the battery

                    charger's air vents. Electric shock or
                    damage to the battery charger may result.

5.  

DO NOT

 charge outdoors. Keep the battery away

                    from direct sunlight and use only where
                    there is low humidity and good ventilation.

6.  

DO NOT

 charge when the temperature is below

                    50°F (10°C) or above 104°F (40°C).

7.  

DO NOT

 connect two battery chargers together.

8.  

DO NOT

 insert foreign objects into the hole for

                    the battery or the battery charger.

9.  

DO NOT

 use a booster transformer when charging.

10. 

DO NOT

 use an engine generator or DC power

                    to charge.

11. 

DO NOT

 store the battery or battery charger in

                     places where the temperature may
                     reach or exceed 104°F (40°C).

12. 

MUST TO DO

 operate charger on standard

                     household electrical power (120 volts).
                     Using the charger on any other voltage
                     may overheat and damage the charger.

13. 

MUST TO DO

 wait at least 15 minutes between

                      charges  t o  avoid overheating the
                     charger.

14. 

MUST TO DO

 disconnect the power cord from

                     its receptacle and cut off the charger
                     power when the charger is not in use.

DISPOSAL OF THE EXHAUSTED BATTERY

WARNING

Do not dispose of the exhausted battery. The
battery must explode if it is incinerated. The
product that you have purchased contains a
rechargeable battery. The battery is recyclable.

At the end of it's useful life, under various state

and local laws, it may be illegal to dispose of
this battery into the municipal waste stream.

Check with your local solid waste officials for

details in your area for recycling options or proper
disposal.

EMPLOYER'S RESPONSIBILITIES

1.  Ensure that this MANUAL is available to operators

     and personnel performing maintenance.

2.  Ensure that Nailers are used only when operators

    and others in work area are wearing EYE PROTECTOR.

3.  Enforce the use of EYE PROTECTOR by operators

     and others in work area.

4.  Keep Nailers in safe working order.
5.  Maintain Nailers properly.
6.  Ensure that Nailers which require repair are not

     further used before repair.

S AV E  TH ES E  MA NU AL  A ND  M AK E  THEM

A VA IL ABLE  TO OTHER USERS AND OWNERS

OF THIS TOOL!

Summary of Contents for GFN3490CH

























Reviews: