manualshive.com logo in svg

Toto WASHLET MS922CUMFG, Instruction Manual, Page: 50 / 60

Share
Download
Toto WASHLET MS922CUMFG Instruction Manual Download Page 50

49

Resupplying the Water

1

Open the shutoff valve. 

(Page 17)

• Check that water is not leaking from a pipe or the top unit.

2

Insert the power plug.

• The "Power" LED lights up.

3

①

Discharge water from the wand.

(1) Pressing down the left side of the toilet seat,
(2

)

  

 Press "Rear washing" button to discharge water from 

the wand.

• Catch the water in a paper cup or other receptacle.

(3) 

 Press "Stopping" button.

②

 Press "Full fl ush" button.

• The toilet fl ushes while the tank fi lls with water. The LED on the main display fl ashes. It stays lit after 

the tank becomes full (about 80 seconds max.).

• You cannot fl ush the toilet until water supply is complete. Never operate the toilet while the tank is 

fi lling with water.

If the remaining water has frozen and no water comes out

• Heat the inside of the bathroom, and warm the water supply hose and shutoff valve using a cloth 

soaked in warm water.

4

After the bowl unit fi lls with water, press 

 ("Full fl ush" button) again.

Soft cloth soaked in water

(to prevent scratching)

Paper cup

Reference

Summary of Contents for WASHLET MS922CUMFG





























































Reviews:

No comments