manualshive.com logo in svg

Toto WASHLET MS922CUMFG, Instruction Manual, Page: 29 / 60

Share
Download
Toto WASHLET MS922CUMFG Instruction Manual Download Page 29

Maintenance 

Power Plug 

Do not use a dry cloth 
or toilet paper on plastic 
parts.

(May cause damage.)

 WARNING

Always unplug the power plug from 
the outlet before maintenance or 
inspection.

(Failure to do so may cause electric shock 
or malfunction, resulting in a breakdown.)

Top unit

Bowl unit

*1 Except when using "Wand cleaning".
*1 After the power plug is inserted, the toilet lid does 

not open automatically for about 10 - 60 seconds. 
(Because it is preparing for operation.)
Open and close by hand.

28

Power Plug 

(Approximately once a month)

Dry cloth 

Wet cloth

1

Unplug the power plug and 
wipe it with a dry cloth.

2

Insert the power plug.

 

• The "Power" LED lights up.

 WARNING

 

●

Periodically remove dust from the 
blades and other parts of the power 
plug.

 

•

Unplug the power plug and wipe it 
with a dry cloth.

 

●

Fully insert the power plug.

 

●

When unplug the power plug, hold 
the main body of the power plug.

 

•

Pulling the power cord may 
damage the power plug or power 
cord.

The "Power" 
LED goes off.

Lit

OFF

For safety, unplug the power 
plug before maintenance. 

*1

Summary of Contents for WASHLET MS922CUMFG





























































Reviews:

No comments