manualshive.com logo in svg

Toto WASHLET MS922CUMFG, Instruction Manual, Page: 33 / 60

Share
Download
Toto WASHLET MS922CUMFG Instruction Manual Download Page 33

Maintenance 

Wand

32

Wand 

(Approximately once a month)

< If you notice dirt (Wand cleaning)>

Soft cloth

Toilet paper, etc. 

(May cause damage.)

1

Extend the wand.

To operate from the back of remote control

 Press "Wand cleaning" button.

To operate from the front of remote control

• 

Recommended if the remote control is secured to prevent 
theft.

(1)

 Press "Stopping" button until all LEDs on the 

remote control start 

fl

 ashing. (about 10 seconds)

(2)

 Press "Front washing" button about 3 seconds 

or longer.

 

•

The wand extends and water sprays out for cleaning.

 

•

The wand automatically retracts after about 5 minutes.

2

Wipe with a soft, wet cloth.

 

•

Do not pull, push or press the wand with excessive 

force. (May cause damage or malfunction.)

3

 Press "Stopping" button on the 

front side of the remote control.

 

•

The wand retracts.

Deodorizing Filter

Summary of Contents for WASHLET MS922CUMFG





























































Reviews:

No comments