Installation of the Dispenser and Tank
Sink
]
Caution
(1)
(2)
Do not install the liquid soap tubes at a height that is taller than the height of the
counter
ven after the unit is
turned off.
(1)
(2)
Standard (TES1/TES2/TES3ADC-05)
Within 16.4' (5m)
Special (TES3/TES4/TES5/TES6ADC-12) Within 39.4' (12m)
Position of the Dispenser
Position of the Tank
Auto Soap Dispenser
Water valve
Screw holes for installing the dispenser
[ 1" ~ 1-1/8" (25 ~ 28mm) in diameter
(2) Tube and cords lengths : 16.4Õ (5m) Standard
39.4Õ (12m) Special
(1) Within 31-1/2"(800mm)
(2) The distance from the soap dispenser
to the edge of the sink = within 3-1/8Ó (80 mm)
(1) Space between the dispenser and the
water valve=more than 4Ó (100mm)
Be sure to leave at least 4Ó (100 mm) of space between the soap dispenser and the watervalve to pre-
vent a malfunction of the detector, which could result in faulty soap spray.
Leave 3-1/8Ó (80 mm) of space from the inside edge of the sink to the spout installationholes to ensure
that any residual soap drips from the dispenser spout into the sink bowl.
Install the liquid soap tank within 31-1/2Ó (800 mm) under the counter.
The tank cannot be installed on top of the counter or underground.
When installing the tank, make sure that the tubes and cords can reach the tank.
, as this may cause the water and soap to discharge e
