9
10
WARNING
Mandatory
When cleaning the filter, be sure to close the stopcock to
the piping before loosening the lid. Also, check that the
hot water side stop valve part is not hot.
(See page 17.)
Hot water at a high temperature may come out and scald you or
cause damage to your property due to water leakage.
Set the cold water supply pressure higher than or equal to
the hot water supply pressure.
In order to prevent scalding due to unsafe operation, the cold water
supply pressure must be set higher than or equal to the hot water supply
pressure. If increasing pressure on the hot water side, make sure the
hot water supply pressure side is set lower than the cold water side.
Pay careful attention when adjusting the flow rate on the
hot water side.
There is a risk that hot water at a high temperature may come out and
you may get burned.
If freezing has occurred, set the safety button of the
temperature control handle to "40" and check if it matches
the discharge temperature.
When there is freezing, there is a risk that the set temperature may
shift and you may get burned.
WARNING
Mandatory
Before using, check the water discharge mode and then
press the Open/Close button.
If you make a mistake, then you might suddenly be splashed with
water or get burned.
Check the temperature handle before turning on the water.
If you turn on the water when it is set ti the hottest setting, the water
may be hot enough to scald you. When using hot water, start with
cold water first and then adjust the water temperature slowly to the
desired temperature.
After using hot water at a high temperature, be sure to
return the safety button on the temperature control handle
back to "40" or less.
This is because there is a risk that when you use it next time, hot
water at a high temperature may suddenly come out and burn you.
After using hot water, turn on the cold water for a while.
Hot water could remain in the faucet and come out at your next use
and may scald you.
Turn the temperature control handle slowly.
Turning the temperature control handle suddenly may result in a
sudden rise in temperature and there is a risk that you may get burned.
Periodically (more than twice a year) check around the
piping for water leakage and loose connections.
Parts may get damaged from deterioration and wear and may cause
leakage resulting in water damage to property or cause injuries such
as scalding.
EN
Summary of Contents for TBW08407
