●
Press a button on the remote control; a beep sounds when the top unit receives the signal.
When
fl
ushing and opening/closing the toilet seat with the remote control
[REAR]
[SOFT]
[WIDE]
[FRONT]
[ FLUSH]
[ FLUSH]
[
]
[DRYER]
[STOP]
Cleanses your rear.
Washes your rear with mild water pressure.
Gently washes a wide area.
Serves as a bidet for ladies.
Performs a full
fl
ush.
Performs a light
fl
ush
Opens and closes the toilet seat.
Dries your rear.
Stops the operation.
Cleansing
Flushing
Drying
Opening and
closing
Stopping
Functions that operate when
a button is pressed during
[REAR], [SOFT], [FRONT] or
[WIDE] cleansing.
[OSCILLATE]
[PRESSURE]
[USER1] / [USER2]
[PULSATE]
[POSITION]
MENU/RETURN button
Temperature adjustment button
Display screen
16
17
Operation
Basic Operations
●
The wand moves back and forth
to wash your rear thoroughly.
The setting changes between "ON" and
"OFF" each time the button is pressed.
You can adjust the water pressure to
one of
fi
ve levels.
([-] Softer, [+] Stronger)
●
When you press the button (REAR,
SOFT, FRONT, WIDE) to
fl
ush, the
position returns to the standard
position (3rd position).
●
Washes with the water pressure pulsating between soft and strong.
The setting changes between "ON" and "OFF" each time the
button is pressed.
You can adjust the washing position to
5 different points between the front and
the rear, using the [
▲
] and [
▼
] buttons.
●
When you press the button
(REAR, SOFT, FRONT, WIDE) to
fl
ush, the position returns to the
standard position (3rd position).
●
Adjust settings
●
Return to previous menu
●
Adjust temperatures
*Adjust settings
The display goes out when no button on the remote
control is pressed for about 60 seconds or more.
If you do not want to return
the wand to the standard
position. (Page 46)
If you do not want to return
the wand to the standard
position. (Page 46)
Note
Sitting back on the toilet seat
makes it easier to adjust the wand
position and to reduce splashing.
Low battery
warning LED
(Page 48)
PERSONAL SETTING
You can store your preferred "wand position," "water pressure," and "warm
water temperature" settings.
●
To store a setting
While cleansing is in progress, set your preferred "wand position," "water
pressure," and "warm water temperature," and then press and hold
[USER1] or [USER2] for 2 seconds or longer.
●
To use
Press [USER 1] or [USER 2], and then press the button for the cleansing
you want to use.
Remote control back side
