36
Water Filter Drain Valve
(Approximately once every 6 months)
<If you think the water pressure has weakened>
1
Close the shutoff valve.
The water supply stops.
Do not remove the water
fi
lter
drain valve while the shutoff
valve is open.
(Otherwise, water may leak out.)
CAUTION
2
Extend the wand.
Operate with the buttons on the back side
of the remote control.
(1)
Press
[MENU].
(2)
Use
to select
"MANUAL CLEANING".
Press [
●
ENTER].
(3)
Use
to select
"WAND CLEANING
ON/OFF".
Press [
●
ENTER] to extend
the wand.
Press [
●
ENTER] again to
retract the wand.
(Release the pressure from
the water supply pipe.)
3
Unplug the power plug.
4
Remove the cover and water
fi
lter drain valve.
Loosen the water
fi
lter drain valve with a
fl
at-head screwdriver and then pull it.
Cover
Flat-head screwdriver
Water
fi
lter drain valve
5
Clean with a tool such as a
toothbrush.
Also, remove any dust from inside the
hole of the water
fi
lter drain valve.
6
Reinstall the water
fi
lter drain
valve and cover.
Insert the water
fi
lter drain valve and
use a
fl
at-head screwdriver to tighten it
securely.
7
Insert the power plug.
The POWER LED lights up.
8
Open the shutoff valve.
(Page 15)
Maintenance
M08009_HK_AH(EN)_CS5.indd 36
M08009_HK_AH(EN)_CS5.indd 36
7/8/2015 8:13:25 AM
7/8/2015 8:13:25 AM