55
Remote control transmitter
Troubleshooting
First, try the actions described on pages 55 to 61.
If the problem persists, consult the installer, seller or the contact listed on the
back cover of this manual.
In the following case, disconnect the power plug and consult the contact
listed on the back cover of this manual.
Please check
fi
rst
Is the
POWER LED lit?
■
Does the LED light up when you
press "POWER ON/OFF" on
the control panel?
■
Is the breaker on the distribution
board turned on?
➞
Check whether there is a power outage or the breaker
has turned "OFF".
Is the
ENERGY SAVER LED
lit?
■
While the LED is lit, energy saver
(Page 26)
is in operation,
so the toilet seat temperature may be reduced or the
heater may be turned off.
Is the remote control
working?
■
Is the Low Battery Warning
LED on the top surface of
the remote control
fl
ashing?
➞
Replace the batteries. (Pages 14, 52)
■
Is the remote control transmitter
or the remote control receiver
blocked?
➞
Remove obstructions, dirt, water droplets or
any other blockages.
Battery cover
Open
Open
The remote
controller uses
batteries
to
operate.
Close
Close
●
All LEDs on the main
display are
fl
ickering
CAUTION
If a water leak occurs,
close the shutoff valve.
Remote control
receiver
Reference
M08009_HK_AH(EN)_CS5.indd 55
M08009_HK_AH(EN)_CS5.indd 55
7/8/2015 8:13:45 AM
7/8/2015 8:13:45 AM