54
Resupplying the Water
1
Open the shutoff valve.
Check that water is not leaking from a pipe or the top unit.
2
If the power is not turned ON
Insert the power plug.
3
Discharge water from the wand.
Pressing down the left side of the toilet seat,
Press the [REAR] button on the remote control to discharge water from the wand.
Catch the water in a paper cup or other receptacle.
■
If the remaining water has frozen and no water comes out
Heat the inside of the bathroom, and warm the water supply hose and
shutoff valve using a cloth soaked in warm water.
4
Press [FLUSH] on the remote control to
fl
ush.
• If there is no water in the tank, you cannot
fl
ush the toilet. Never operate the toilet with
no water in the tank.
(When the tank is
fi
lling with water, the LED on the main display will
fl
ash. After the tank
is full, the LED changes. (Maximum tank
fi
lling time: approx. about 60 seconds))
5
After the bowl unit
fi
lls with water, press [FLUSH] again.
Soft cloth soaked in water
(to prevent scratching)
Paper cup
What to Do?
Long Periods of Disuse
How to drain the water (continued)
4
Pull out the water drain lever.
The water comes out from near the wand
for about 20 seconds.
Water drain lever
5
Release your hand to return the water drain
lever to its original position.
■
To use the NEOREST again
• The water needs to be resupplied. (See below)
M08009_HK_AH(EN)_CS5.indd 54
M08009_HK_AH(EN)_CS5.indd 54
7/8/2015 8:13:45 AM
7/8/2015 8:13:45 AM
