background image

T-310  Effective May 2004

Printed in USA ©  0504

Geberit In-W

Geberit In-W

all Pressure 

all Pressure 

Assist 

Assist 

T

T

oilet System

oilet System

INST

INST

ALLA

ALLA

TION INSTRUCTIONS

TION INSTRUCTIONS

Geberit Manufacturing, Inc.

1100 Boone Drive, Michigan City, IN  46360

Phone: (800) 225-7217 • Fax: (219) 872-8003

www.us.geberit.com

Trademarks

The PF/2

®

Pressure Assist Tank is licensed by one or more of

the following U.S. patents: 5361426, 5970527, 6343387,

RE37921 and other patents pending. PF/2

®

is a registered 

trademark of Geberit.

Copyrights

© 2004 Geberit.  All rights reserved.  The information in this 

manual is subject to change without notice.

Notice to Installers

Please leave this manual with the facility manager after complet-

ing the Pressure Assist Toilet installation. This document contains

information necessary for routine maintenance and servicing.

TABLE OF CONTENTS

Product Overview

.....................................................................2

Features

.....................................................................................2

In Compliance With

..................................................................2

Available Options

.....................................................................2

How to Order

.............................................................................2

Technical Support

....................................................................2

Product Specifications

.............................................................2

Installation Requirements

........................................................2

Safety Information

....................................................................3

Dimensions

............................................................................3-4

Component Identification

........................................................5

Tank & Carrier Installation

....................................................6-7

Wall Hung Bowl Installation

.................................................8-9

Access Panel-Flush Actuator Installation

.......................10-11

Theory of Operation

...............................................................11

Troubleshooting Guide

..........................................................12

Warranty

..................................................................................12

ADA Compliant

ww

w.TheA

nwserLine.com

Summary of Contents for Chicago Faucets 111.817.00.1













Reviews: