{TCF4911E***, TCF4914E***}
Gap between the Main Unit and Bowl Unit
(Approximately once a month)
You can remove the main unit to clean
the top of the bowl unit and the bottom of
the main unit.
Soft cloth soaked in water
Toilet paper, etc. (May cause damage.)
1
Switch the breaker on the
distribution board to OFF.
If the breaker on the distribution board is not turned off, the
unit may malfunction or cause a failure or electric shock.
2
Remove the main unit.
x
Do not pull the unit with undue force (because the water supply hose and power cord are attached).
(1) Pull the main unit toward you while pressing
the "Main unit removal button".
Main unit
removal button
Top of the bowl unit
Base plate
Bolt
(2) Lift up the main unit.
•Do not excessively bend the water supply hose.
3
Clean the top of the bowl unit and the bottom of the main unit.
x
Wipe with a soft cloth soaked in a diluted, neutral kitchen detergent. Then, wipe it with a soft cloth soaked
in water so that no detergent remains.
4
Mount the main unit.
(1) Lift the main unit, then lower it straight down while threading the
power cord and water supply hose into the recess on the bowl unit.
•Be careful not to pinch the power cord.
•Do not excessively bend the water supply hose.
(2) Align the main unit with the center of the base
plate and press it
rmly onto the base plate until a
click sound is heard
Click
Base plate
After mounting, check that the main unit
does not detach even when pulled.
CAUTION
Push the main unit
rmly on to the
base plate until a click sound is heard.
(Failure to do so could cause the main unit
to come loose and fall resulting in injury.)
5
Switch the breaker on the distribution board to ON.
x
The "Power" LED lights up.
Maintenance
Gap between the Main Unit and Bowl Unit
32
