Gap between the Main Unit and Bowl Unit
(Approximately once a month)
You can remove the main unit to clean
the top of the bowl unit and the bottom of
the main unit.
Soft cloth soaked in water
Toilet paper, etc. (May cause damage.)
1
Switch the breaker on the
distribution board to OFF.
If the breaker on the distribution board is not turned off, the
unit may malfunction or cause a failure or electric shock.
2
Remove the main unit.
x
Do not pull the unit with undue force
(because the water supply hose and
power cord are attached).
Pull the main unit toward you while
pressing the "Main unit removal button".
Base plate
Bolt
Top of the bowl unit
Main unit
removal button
3
Clean the top of the bowl unit and the bottom of the main unit.
x
Wipe with a soft cloth soaked in a diluted, neutral kitchen detergent. Then, wipe it with a soft cloth soaked
in water so that no detergent remains.
4
Mount the main unit.
x
Be careful not to pinch the cords between the main unit and the base plate.
After mounting, check that the main unit
does not detach even when pulled.
CAUTION
Push the main unit
rmly on to the
base plate until a click sound is heard.
(Failure to do so could cause the main unit
to come loose and fall resulting in injury.)
Base plate
Click
Align the main unit
with the center of
the base plate and
press it
rmly onto
the base plate until
a click sound is
heard.
5
Switch the breaker on the distribution board to ON.
x
The "Power" LED lights up.
{TCF4911***, TCF4914***}
33
Maintenance
