38
Data Rate
This defines the data rate (in Mbps) at which the device should transmit wireless packets.
You can fix a specific data rate between MCS 0 and MCS 7 also. It is recommended to use
Auto option, especially if you are having trouble getting connected or losing data at a higher
rate.
MCS
means Modulation Coding Scheme
.
Before 802.11n standard emerges, most
Access Points complies with 802.11a/b/g standards and the data rate ranges from
1Mbps to 54Mbps, including only 12 possible physical speed. But when it comes to
802.11n technology, the physical speed can be affected by many factors, such as
modulation type, coding rate, space flow quantity, whether 40MHz banding and so on.
Combining these factors together will create a lot of selectable physical speed. Thus,
802.11n proposes the term MCS. You can consider this term to be a whole combination
of these factors and every digit represents a combination.
Associate Clients:
Click Show Active Clients Button it will come to WiFi Station interface.
Encryption:
This router supports Disabled, WEP, WPA, WPA2, WPA-Mixed security
options. By default, it is disabled. Please select one according to the Access Point security
policy for a secure network.
1) WEP
WEP (Wired Equivalent Privacy) is based on the IEEE 802.11 standard and uses the RC4
encryption algorithm. Enabling WEP allows you to increase security by encryption data
being transferred over your wireless network. WEP is the oldest security algorithm, and
Note: If you select 20MHz Channel Spectrum width the maximum data rate is MCS7 (65Mbps). If
you select 40MHz Channel Spectrum width the maximum data rate is MCS7(150Mbps).
Note: This option will keep Enabled and can’t be changed by default.
