12
In this mode, the device can copy and reinforce the existing wireless signal to extend the
coverage of the signal, especially for a large space to eliminate signal-blind corners. It is
good for extending your existing wireless coverage by relaying wireless signal.
D: Router
In this mode, the device enables multi-users to share Internet via ADSL/Cable Modem. The
Wireless port share the same IP to ISP through Ethernet WAN port .The Wireless port acts
the same as a LAN port while at AP Router mode. The connection type can be setup in
WAN page by using PPPOE, DHCP client, PPTP client, L2TP client or static IP.
E: Bridge with AP
In this mode, the device can be used to combine multiple local networks together to the
same one via wireless connections, especially for a home or office where separated
networks can’t be connected easily together with a cable.
F: Client
In this mode, the device can be connected to another device via Ethernet port and act as a
"Wireless Adapter" to connect your wired device to a wireless network.
4.3.1 Router Mode
After selecting the Router mode in the last step, click next to continue the other settings.
1. This page allows you to maintain the system time synchronizing with a public time server
over the Internet. Here, you can specify the device’s time zone according to GMT
(Greenwich Mean Time). Then click
Next
.
Enable NTP client update: NTP
means Network Time Protocol which is used to make the
computer’s time synchronized with its server or clock source, such as Quartz and GPS. It
can provide high-precision time correction and prevent harmful protocol attack by
confirming encryption. You need to check this box to activate this page.
Automatically Adjust Daylight Saving:
If the Time Zone you choose implements daylight
saving time, please select this option.
Time Zone Select:
Select the Time Zone where the router is located.
SNTP server:
Please choose the corresponding SNTP server to get right time.
2. This page is used to configure the parameters for local area network which connects to
the LAN port of your Access Point.
