25
LAN Interface Setup
IP Address:
This is the IP addresses to be represented by the LAN (including WLAN)
interface that is connected to the internal network. This IP will be used for the routing of
the internal network (it will be the Gateway IP for all the devices connected on the
internal network).
Subnet Mask:
This is used to define the device IP classification for the chosen IP
address range. 255.255.255.0 is a typical netmask value for Class C networks which
support IP address range from 192.0.0.x to 223.255.255.x. Class C network netmask
uses 24 bits to identify the network and 8 bits to identify the host.
WAN Interface Setup
This part allows you to configure the WAN port parameters so that your computer can
access Internet. Since we have discussed WAN Access Type on Setup Wizard, please
refer to Setup Wizard to fill in the parameters.
WLAN Interface Setup
Band
：
In fact, this option allows you to choose the radio standard for operation of your
router. 802.11b and 802.11g are old 2.4GHz mode, while 802.11n (2.4GHz and/or
5GHz, in this case, only supports 2.4GHz) is the latest standard based on faster
Orthogonal Frequency Division Multiplexing (OFDM) modulation. Here, you can choose
the last one 2.4GHz (B+G+N), this mode offers better compatibility.
Mode
：
Wireless mode specifies the operating mode of the device. The mode depends
on the network topology requirements. There are 2 operating modes supported in this
software.
AP:
This mode allows users with laptop to surf Internet by wireless connection. It’s
designed to add wireless function for existed wired router which is just suitable for
