10
Using your INTU QC 200
Configure Preheat Settings (VT/
TCR Modes):
Preheat settings are configurable
in terms of power (Watts) and
time (seconds). When the device
is powered off, hold the power
button and up adjustment button
simultaneously to activate the
configuration menu. Use the
power button to cycle through
the menu until ‘Time’ or ‘Power’
is selected, then use the up and
down adjustment buttons to set the
desired value. Leave the device for
10 seconds or long press the power
button to confirm the selection.
USB Charge Mode:
To turn USB mode on/off, when
the device is powered off, hold the
power button and the up adjustment
button to activate the configuration
menu. Use the power button to
cycle through the options and select
‘USB’, when selected use the up or
down adjustment buttons to select
between the on/off states. Leave
the device for 10 seconds or long
