11
Using your INTU QC 200
press the power button to confirm
the selection.
Once the ‘on’ state is selected, the
USB Charge mode will be available
when the device is powered on.
When the INTU QC 200 is connected
to the device which is to be charged
via a suitable RC adaptor and Micro
USB cable, quickly press the power
button three times to activate the
menu, then use the up or down
adjustment buttons to cycle through
the modes and select USB Charge.
Once USB Charge is selected, single
press the power button to initiate
charging.
Note: To use USB charge mode,
a suitable RC adaptor must be
installed onto the device. An RC
adaptor is not included and must be
purchased separately.
