8
Using your INTU QC 200
Configuring TCR Mode:
To set the temperature coefficient
of resistance to match a particular
coil, when the device is powered
off, simultaneously hold the power
button and the up adjustment button
to enter the configuration menu.
Use the power button to select
which to configure from M1, M2 and
M3 – this feature allows the TCR
values for 3 materials to be stored
to the device. Once M1, M2, or M3
has been selected, use the up and
down adjustment buttons to increase
or decrease the value to your
preference, long press the power
button or leave the device for 10
seconds to confirm the selection.
