Installation Guide
69-2268—03
2
570-219
M29130
WALL OPENING
WALL ANCHORS (2)
(PROVIDED WITH
THERMOSTAT)
WALL
DRILLED
HOLES (2)
MOUNTING
SCREWS (2)
WIRE
Wallplate installation
1. Separate wallplate from thermostat.
2. Mount wallplate as shown below.
MERCURY NOTICE
If this product is replacing a control that contains mercury in a sealed tube, do not
place the old control in the trash. Contact your local waste management authority for
instructions regarding recycling and proper disposal.
CAUTION: ELECTRICAL HAZARD
Can cause electrical shock or equipment damage. Disconnect power before
beginning installation.
Drill 3/16” holes for drywall.
Drill 7/32” holes for plaster.
Must be installed by a trained, experienced technician
• Read these instructions carefully. Failure to follow these instructions
can damage the product or cause a hazardous condition.
M29131
Grasp top and
bottom of wallplate
and pull to remove
from thermostat.
