TRWS indicator
user’s manual
SECTION 7 PARAMETERS
The scale has 6 parameters that can be set by the user plus a method of entering the
calibration section.
Press the
UNIT
key and
PRINT/M+
key together in the weighing mode and release it
when indicator beeps.
The display will show the first function, "
F0 H-L
".
Pressing the
TARE
key will cycle through the other functions.
Pressing
ZERO
will allow you to set the function. It may be necessary to either use
TARE
or set a value using the
G/N
key to move the active digit and then using the
TARE
key to increment a digit, followed by the
ZERO
key to enter the value. Use the
UNIT
key to leave a parameter unchanged.
For example when the display shows “
F0 H-L
” press the
ZERO
key to begin.
The display will show “
Set Lo
”, press the
ZERO
key to set the low limit, or press the
TARE
to skip to the next parameter, “
Set Hi
” for setting the high limit.
After pressing the
ZERO
key to set a limit, use the
G/N
keys to change the flashing
digit, and then use the
TARE
key to increment the flashing digit. Continue to the
next digit and set it as needed.
When all digits have been set press the
ZERO
key to store the value. The display
will go back to the parameter just set, i.e. “
Set Lo
”. Advance to another parameter if
needed or press the
UNIT
key to return to weighing.
FUNCTION MENU SETTINGS
FUNCTION SUB-FUNCTION
DESCRIPTION
DEFAULT
VALUE
F0 H-L
SEt Lo
Set a value for the Low limit.
000000
SEt HI
Set a value for the High Limit.
000000
F1 toL
to CLr
Clears the accumulation memory
without printing the results.
to P-C
Prints the Accumulation memory
total and then clears the memory.
to Prt
Prints the Accumulation Total, does
not clear the memory.
F2 u nt
Sets the displayed unit, you can
press TARE key to set ON or OFF,
press ZERO key to sure
kilogram,
kg, g, oz,
tj, hj.
F3 off
bL
Set the backlight to be on,
automatic or off,
EL on
/
EL Au
/
EL off
EL Au
bEEP
Set
the
beep
mode.(check
weighing mode 2, check weighing
mode 3, mode 1 (no beep))
-10-
