Totalcomp TEI, Operation Manual

Page: 21 / 25

. 19 .
Serial Communication (continued) Serial Communication (continued) Serial Communication (continued) Serial Communication (continued)
Command and Response Communication Summary when USER
USER USER
USER----COM1/2
COM1/2 COM1/2
COM1/2----LAYOUT
LAYOUT LAYOUT
LAYOUT is set to SINGLE
SINGLE SINGLE
SINGLE:
Command Command Command Command
Response Response Response Response
ASCII ASCII ASCII ASCII HEX HEX HEX HEX
W<CR> 57 0d
Read scale weight:
①
<LF>^^^^^^^^U
1
U
2
U
3
U
4
U
5
<CR><LF> H
1
H
2
H
3
H
4
<CR><ETX>---over capacity
②
<LF>________U
1
U
2
U
3
U
4
U
5
<CR><LF> H
1
H
2
H
3
H
4
<CR><ETX>---under capacity
③
<LF>-------- U
1
U
2
U
3
U
4
U
5
<CR><LF> H
1
H
2
H
3
H
4
<CR><ETX>---zero-point error
④
<LF><p>W
1
W
2
W
3
W
4
W
5
<dp>W
6
U
1
U
2
U
3
U
4
U
5
<CR><LF>H
1
H
2
H
3
H
4
<CR><ETX>---normal data
S<CR> 53 0d
<LF> H
1
H
2
H
3
H
4
<CR><ETX>; read scale status
Z<CR> 5a 0d
<LF> H
1
H
2
H
3
H
4
<CR><ETX> ; simulate ZERO key
T<CR> 54 0d
<LF> H
1
H
2
H
3
H
4
<CR><ETX> ; simulate TARE key
U<CR> 55 0d
<LF> U
1
U
2
U
3
U
4
U
5
<CR><LF> H
1
H
2
H
3
H
4
<CR><ETX>; simulate UNIT key
L<CR> 4c 0d
<LF> H
1
H
2
H
3
H
4
<CR><ETX>; simulate HOLD key
X<CR> 58 0d Powers off the scale, simulates OFF key
others <LF>?<CR><EXT>
Command and Response Communication Summary when USER
USER USER
USER----COM1/2
COM1/2 COM1/2
COM1/2----LAYOUT
LAYOUT LAYOUT
LAYOUT is set to MULTIPLE
MULTIPLE MULTIPLE
MULTIPLE:
Output string frame:
<LF><Prompt><p>W
1
W
2
W
3
W
4
W
5
<Dp>W
6
U
1
U
2
U
3
U
4
U
5
<CR>
…… ---- Line number and content are determined by setting of USER USER USER USER----OUT1/2 OUT1/2 OUT1/2 OUT1/2----xxxx xxxx xxxx xxxx
<LF><Prompt>H
1
H
2
H
3
H
4
<CR> ---- USER USER USER USER----OUT1/2 OUT1/2 OUT1/2 OUT1/2----STATUS STATUS STATUS STATUS is set to YES YES YES YES
…… …… …… ……
<LF>
The unit position and bytes are determined by the current unit of measure.
The details of <Prompt> refer to the content in User Setup
User Setup User Setup
User Setup submenu.
In hold mode, if the A/D conversion speed is set to high (80Hz), and USER
USER USER
USER----COM1/2
COM1/2 COM1/2
COM1/2----LAYOUT
LAYOUT LAYOUT
LAYOUT is set to MULTIPLE
MULTIPLE MULTIPLE
MULTIPLE, the outputs
from COM1 or COM2 may not catch up with the data processed in the indicator. To watch “real time” data, you may need to
select fewer outputs and set a higher baud rate for C<CR> --- USER
USER USER USER----OUT1/2 OUT1/2 OUT1/2 OUT1/2----LINE LINE LINE LINE is set to LINE1/2/3/4 LINE1/2/3/4 LINE1/2/3/4 LINE1/2/3/4
…… ---The number of blank lines is determined by USER USER USER USER----OUT1/2 OUT1/2 OUT1/2 OUT1/2----LINE LINE LINE LINE setting
<ETX> --- Last byte of string frame
Caution: COM1 or 2.
Examples of some layouts when USER
USER USER USER----OUT1/2 OUT1/2 OUT1/2 OUT1/2----xxxx xxxx xxxx xxxx is set to YES YES YES YES (USER USER USER USER----COM2 COM2 COM2 COM2----EN.ADDR EN.ADDR EN.ADDR EN.ADDR=No No No No):
In weighing mode: In weighing mode: In weighing mode: In weighing mode: In counting mode: In counting mode: In counting mode: In counting mode: In percent weighing mode: In percent weighing mode: In percent weighing mode: In percent weighing mode:
SCALE ID: 123456 SCALE ID: 123456 SCALE ID: 123456
GROSS: 123lb 4.56oz GROSS: 1234.55kg GROSS: 12345lb
TARE: 11lb 2.22oz TARE: 12.15kg TARE: 10lb
NET: 112lb 2.34oz NET: 1222.40kg NET: 12335lb
ACC. N: 8 QUANTITY: 24448pcs PERCENTAGE: 91.4%
TOTAL: 789lb 15.2oz PIECE WT: 0.05kg 1% REF. WT: 135lb
DATE: 2011-06-12 ACC. N: 10 ACC. N: 3
TIME: 12:34:56 TOTAL: 23456pcs TOTAL: 271.6%
A/D CODE: 1234567 DATE: 2011-06-12 DATE: 2011-06-12
VOLTAGE: 6.7V TIME: 12:34:56 TIME: 12:34:56
STATUS: bpq2 A/D CODE: 1234345 A/D CODE: 1231234
VOLTAGE: 6.7V VOLTAGE: 6.7V
STATUS: bpq2 STATUS: bpq2