.
16
.
Geographic
Geographic
Geographic
Geographic AAAAdjustment
djustment
djustment
djustment
Note:
Note:
Note:
Note: P
PP
Press
ress
ress
ress ZERO/ON/OFF
ZERO/ON/OFF
ZERO/ON/OFF
ZERO/ON/OFF at any time to
at any time to
at any time to
at any time to exit c
exit c
exit c
exit calibration mode.
alibration mode.
alibration mode.
alibration mode.
1.
Enter Calibration
Calibration
Calibration
Calibration mode as directed in the previous section.
2.
“ZERO
ZERO
ZERO
ZERO” will be displayed. Use the up and down arrow keys to select “
GEO
GEO
GEO
GEO
”, then press the TARE/PRESET
TARE/PRESET
TARE/PRESET
TARE/PRESET key to confirm and
enter geographic
adjustment
mode.
3.
There are two ways to input the
geographic
adjustment:
a.
For adjustments specific to your actual latitude and elevation:
i.
When “CODE
CODE
CODE
CODE” is shown,
press the TARE/PRESET
TARE/PRESET
TARE/PRESET
TARE/PRESET key. U
se
the arrow keys
to select the geographic adjustment code
for your location (00-70) using Table 1. Press TARE/PRESET
TARE/PRESET
TARE/PRESET
TARE/PRESET key to confirm.
Note:
Note:
Note:
Note: The latitude and elevation for your location can be obtained via an internet search.
Note:
Note:
Note:
Note: Elevations in Chart 2 are given in kilometers. 1000 ft = 0.305 km
b.
To enter a known acceleration of gravity constant:
i.
When “CODE
CODE
CODE
CODE” is shown, use
the up and down arrow keys
to select “GRAVT
GRAVT
GRAVT
GRAVT”. Press TARE/PRESET
TARE/PRESET
TARE/PRESET
TARE/PRESET key to confirm.
ii.
When “GRAVT
GRAVT
GRAVT
GRAVT” is shown, use
the arrow keys
to enter the acceleration of gravity constant for your latitude position
and elevation (9.76183-9.99999 m/s
2
). Press TARE/PRESET
TARE/PRESET
TARE/PRESET
TARE/PRESET key to confirm
4.
Press ZERO/ON/OFF
ZERO/ON/OFF
ZERO/ON/OFF
ZERO/ON/OFF to exit setup. Geographic
adjustment
is now complete.
TABLE
TABLE
TABLE
TABLE 1111: : : : Global Geographic Adjustment Code by elevation and latitude.
