.
17
.
Miscellaneous Submenu Settings
Miscellaneous Submenu Settings
Miscellaneous Submenu Settings
Miscellaneous Submenu Settings
1.
Enter Setup
Setup
Setup
Setup mode by pressing and holding the HOLD
HOLD
HOLD
HOLD/SETUP
/SETUP
/SETUP
/SETUP key for 4 seconds.
2.
After entering SSSSetup
etup
etup
etup Mode, the main menu item “CONFIG
CONFIG
CONFIG
CONFIG”””” will be displayed. Do NOT
NOT
NOT
NOT enter CONFIG
CONFIG
CONFIG
CONFIG Setup Mode. Use the arrow keys to
move to MISC
MISC
MISC
MISC Mode, then press TARE/PRESET
TARE/PRESET
TARE/PRESET
TARE/PRESET to enter miscellaneous setting mode. If you enter the wrong mode, press the
HOLD
HOLD
HOLD
HOLD/SETUP
/SETUP
/SETUP
/SETUP key to return to the main menu, or press ZERO/ON/OFF
ZERO/ON/OFF
ZERO/ON/OFF
ZERO/ON/OFF at any time to exit setup.
3.
After entering MISC
MISC
MISC
MISC Mode, the submenu item ““““CCCCODE
ODE
ODE
ODE”””” will be shown first. Do NOT
NOT
NOT
NOT enter CCCCODE
ODE
ODE
ODE Setup Mode. Use the arrow keys to
move past CODE
CODE
CODE
CODE and VOL
VOL
VOL
VOL Modes to DATE
DATE
DATE
DATE Mode, then press TARE/PRESET
TARE/PRESET
TARE/PRESET
TARE/PRESET to display the current date. Date format is yy.mm.dd. If
you enter the wrong mode, press the HOLD
HOLD
HOLD
HOLD/SETUP
/SETUP
/SETUP
/SETUP key to return to the previous menu, or press ZERO/ON/OFF
ZERO/ON/OFF
ZERO/ON/OFF
ZERO/ON/OFF to exit setup.
4.
Press the UNIT/DATA
UNIT/DATA
UNIT/DATA
UNIT/DATA key for 4 seconds to enter date modification mode. Use the arrow keys to modify the date. If no entry is made
within 5 seconds, it will automatically exit modification mode.
5.
Press the HOLD
HOLD
HOLD
HOLD/SETUP
/SETUP
/SETUP
/SETUP key to return to the previous menu and use the arrow keys to move to TIME
TIME
TIME
TIME Mode, then press
TARE/PRESET
TARE/PRESET
TARE/PRESET
TARE/PRESET to display the current time. Time format is hh.mm.ss as a 24 hour format.
6.
Press the UNIT/DATA
UNIT/DATA
UNIT/DATA
UNIT/DATA key for 4 seconds to enter time modification mode. Use the arrow keys to modify the time. If no entry is made
within 5 seconds, it will automatically exit modification mode.
7.
Press the HOLD
HOLD
HOLD
HOLD/SETUP
/SETUP
/SETUP
/SETUP key to return to the previous menu and use the arrow keys to move to VER
VER
VER
VER Mode. Press TARE/PRESET
TARE/PRESET
TARE/PRESET
TARE/PRESET to
view the software version. Firmware version format is Vxx.yy, where xx is the hardware version, and yy is the software version.
8.
Press ZERO/ON/OFF
ZERO/ON/OFF
ZERO/ON/OFF
ZERO/ON/OFF to exit setup.
MISC Submenu:
MISC Submenu:
MISC Submenu:
MISC Submenu:
SUB
SUB
SUB
SUB----
MENU1
MENU1
MENU1
MENU1
REMARK
REMARK
REMARK
REMARK
CODE
Displays the ADC (Analog to Digital Converter) code. ADC setting to be adjusted by a technician only.
VOL
Displays battery voltage. Normal battery range is 5.6V-7.6V. Replace batteries if below 5.6V.
DATE
Displays and sets the date
TIME
Displays and sets the time
VER
Displays firmware version
