3
Safety rules for correct use
Double insulation for additional protection
Please read the instruction manual before use.
CE conformity.
Wear safety glasses, gloves, hearing protection, and a dust mask.
Waste electrical products must not be disposed of with household waste.
Please recycle at the appropriate facilities. Check with your local authority or
retailer for recycling advice.
Security alert. Use only accessories supported by the manufacturer.
Additional security warnings
•
Do not use damaged, worn or out of shape tools.
•
Do not use tools with bent shafts.
•
The tool is designed for light work, do not use it for heavy work as it may damage
the tool.
•
Check the collet nut frequently for tightness, especially if you use the tool at a
very high speed.
•
Use only accessories supplied or recommended by your dealer; other
accessories may cause personal injury.
•
Use the correct speed.
•
Clean the ventilation slots after use.
•
Do not operate the tool with any part of the housing missing or damaged.
•
Always wear eye protection with this tool.
Warning
Sanding will produce harmful/toxic dusts on lead painted surfaces, wood and metal.
Contact or inhalation of these dusts can endanger the health of the operator and
bystanders.
•
Keep work area clean, cluttered areas and benches can lead to injuries.
•
Remove the adjusting keys and wrenches. Get in the habit of checking to see
that keys have been removed from the tool before turning it on.
•
Make sure the abrasive is properly mounted and tightened before use and run
the tool without load for 30 seconds in a safe position, stop immediately if there
