2
Security instructions
Caution
Read all safety warnings and instructions. Failure to comply with them may result in
electric shock, fire and/or serious injury.
To ensure safe operation when using your power tool, be sure to follow basic safety
principles to reduce the risk of personal injury, electrical shock, and fire. Please read the
following instructions before using this product. Save these instructions for future
reference.
•
Do not allow children to handle the tool. All bystanders must stay away
from your work area.
•
Protect yourself against electric shock: Keep the tool away from the cord
while you work. Do not work on or near "live" equipment or services.
•
Do not use the tool in damp or wet areas. Do not use near flammable
gases or liquids.
•
For your own safety, wear safety glasses. Tie up long hair. Wear ear
protectors, especially in confined areas. Keep your body away from
moving parts while in use.
•
Avoid wearing loose clothing or jewelry to prevent them from being caught
in moving parts.
•
Don't force the tool, it will do a better and safer job at the rate for which it
was designed.
•
When not in use, store it in a dry and high place or keep it locked up out
of reach of children. Use the tool only for its intended purpose.
•
Protect the cord and do not carry the tool by the cord or pull on the cord to
remove the plug from the outlet. Protect the cable from sharp objects, heat
and oil. Replace it if it is damaged.
•
Check before use and always make sure the tool and cord are not
damaged.
•
Inspect tool cord and extension cords periodically for damage; if they are
damaged, have an authorized dealer perform the repair.
•
Unplug tools when not in use or change tools, always unplug them from
the mains.
•
Avoid unintentional starting by making sure the ignition tool is turned off
before plugging it in.
•
Do not use the tool when you are tired.
•
Before use, check the tool for damage; if in doubt, have it checked by an
authorized dealer.
•
Always have repairs done by a qualified person for your safety.
Note: Remove plug from outlet before making any adjustments or servicing.
