24/32
N° Problem
Cause
Action
7 The forks can’t be
lowered
The piston rod or pump body is
deformed due to partial loading
slanting to one side or due to
overloading
Replace the piston rod or pump body
The forks were kept in their highest
position for a long time with the piston
rod exposed, resulting in rust and
causing the rod to jam
Lubricate the rod. Keep the forks
in the lowest position when not in
use, and pay more attention to the
lubrication of the rod.
The adjuster nut or screw is not in the
correct position
Adjust the nut or the screw
Control lever is no longer adjusted
correctly
Follow the procedure for adjusting the
control lever in chapter 6
Obstacle located under truck, in fork
mechanism …
Remove the obstacle with caution
If none of these troubleshooting suggestions or solutions were helpful, please contact your
local dealer or the manufacturer.
Summary of Contents for TRSM0004
Page 28: ...28 32 NEUTRAL LOWERING LIFTING 10 2 Hydraulic diagram...
Page 31: ...31 32 NOTES...
