Total Source ELP15EULIT, Operating Manual

Page: 21 / 44

21/44
2. Steering
Turn the tiller to the left or right.
3. Emergency stop
Pull out the puller (3) or press the emergency stop switch, all electrical functions are cut and
the pallet truck will automatically brake. After using the emergency stop, you can switch the
semi-electric pallet back on as described above.
4. Automatic braking
When the tiller is released, it automatically returns to the upper brake zone (B) and the truck
will brake.
5. Regenerative braking
If the travel switch is released (when the handle is in the upright position), the pallet truck
will automatically brake regeneratively. When the speed is below 1 km/h, the brake will
apply and the engine brake will stop.
6. Lift
Push the lever down. Lift the forks by moving the tiller up and
down until the desired lifting height is achieved. Reset the
lowering lever to its neutral position.
7. Lower
Lower the forks to their lowest position by pulling the lever
upwards.
8. Loading and unloading the pallet truck:
1. Position and level the forks so that they are in line with
the pallet inlets.
2. Slowly insert the forks into the inlets until the pallet hits
the back of the forks.