8.3 Reports
All cable test stored on the ACT v2 are accessible in the Reports section and are listed in
a table format. Individual test reports can be viewed by clicking on the test report of
interest.
Figure 27
: Web Application - All Test Reports
The test report table provides the status of the test, when the test was run and which test
pro
fi
le was used. The total number of tests is listed at the top of the page. The number of
tests displayed can be changed by using the
Rows
drop-down menu to change the
number of rows visible.
8.3.1 Reports Management
Two actions are available to users to manage test reports in the list view: Delete and
Export. These actions are accessible from the buttons above and below the table of test
reports.
Select/Unselect
Individual test reports can be select and unselected by toggling the checkbox next to the
test report. Additionally, all visible test reports can be selected or unselected by clicking
Advanced Cable Tester v2 User Manual v2.0.0
40
