8 User Interface Overview
The Advanced Cable Tester Application v2 is simply accessed via HTTP from an
HTML5-compatible web browser. This could be a mobile phone, tablet, or most often a
PC. Please consult the Quick Start Guide at the end of this manual.
Features:
•
Responsive design:
Single web interface is compatible with mobile browsers,
tablets, and PCs.
•
Standalone mode:
Advanced Cable Tester v2 can operate without a connection
to a host device.
•
Test pro
fi
les:
stored on the device. Test pro
fi
les can be imported and exported to
share between devices.
•
Test reports:
up to 1 million reports can be stored on the device. The test reports
are stored in a circular bu
ff
er. If the results storage is full, then the oldest test
reports will automatically be cleared to make room for the new test reports.
Please note that since this ACT v2 application is accessed through a web browser, it is
possible that the web browser can lose connection to the tester hardware. In these
situations, the web application will attempt to reconnect as best as it is able to. Please
note that there will be situation where the web application will not be able to re-
synchronize successfully with the hardare. In these cases, a browser refresh should
restore the synchronization.
8.1 Navigation
The top navigation bar provides quick and easy access to the high-level functionality of
the Advanced Cable Tester v2.
Figure 14
: Web Application - Navigation Header
Table 5
: Navigation Header
Advanced Cable Tester v2 User Manual v2.0.0
31
