If the ACT v2 is set to DHCP, the assigned IP address will be displayed if it has been
assigned. This address will only appear if the tester has been connected to the network
and has received an address. If no address appears, reloading the page will update this
information.
If the ACT v2 is set to Fixed IP address, the IP and subnet can be entered into the
interface. Please make sure to click
Set
to submit the data.
4.3.3 Firmware/License Update
Firmware and license updates are easy to perform through the web management
interface. Both types of updates will be provided as a PMU
fi
le from Total Phase. To
install the PMU:
1. Click on
Choose File
and select a PMU
fi
le on your local
fi
le system
2. Click on
Upload
. Once the PMU
fi
le has been uploaded, it will be veri
fi
ed.
3. You must con
fi
rm the installation of the update by click
Yes
on the update page.
Clicking on
Cancel
will return you to the management interface.
4. Once the
fi
rmware has been updated, the ACT v2 will reboot and return you to the
management interface after a successful installation.
After updating the
fi
rmware, please be sure to force a refresh of your web browser cache
to ensure that the latest web application is loaded when operating the tester.
4.3.4 Clock Control
The ACT v2 tester has a real-time clock to ensure that all cable tests are appropriately
time stamped. To set the date and time, simply click the
Set Date/Time
button. The
subsequent page will display the current time in the ACT v2 and the current time of the
local computer. Updating the date/time is a convenient single click to synchronize the
ACT v2 with the local computer.
4.3.5 System Control
It is possible to remotely reboot the ACT v2 using the management interface. To do so,
simply click the
Reboot
button.
Advanced Cable Tester v2 User Manual v2.0.0
23
