7HFKQLFDO,QIRUPDWLRQ
6HUYLFH0DQXDO
4
MODE
Each time you press this button,a mode is selected in a sequence that goes from AUTO, COOL,DRY, FAN,and HEAT *, as the
following:
After energization, AUTO mode is defaulted. In AUTO mode, the set temperature will not be displayed on the LCD, and the unit
will automatically select the suitable operation mode in accordance with the room temperature to make indoor room comfortable.
This button is used for setting Fan Speed in the sequence that goes from AUTO, , , , , , to then back
to Auto.
Press this button to set up &down swing angle, which circularly changes as below:
This remote controller is universal . If any command , or is sent out,the unit will carry out the command as
indicates the guide louver swings as:
Press this button to turn on I FEEL function. The unit automatically adjust temperature according to the sensed temperature. Press
this button again to cancel I FEEL function.
Press this button to achieve the on and off of healthy and scavenging functions in operation status.Press this button for the first time
to start scavenging function; LCD displays“ ”. Press the button for the second time to start healthy and scavenging functions
simultaneously; LCD displays“ ” and “ ” . Press this button for the third time to quit healthy and scavenging functions
simultaneously. Press the button for the fourth time to start healthy function; LCD display “ ”. Press this button again to repeat
the operation above.
●Press this button, can select Sleep 1 ( ), Sleep 2 ( ),Sleep 3 ( ) and cancel the Sleep,circulate between these, after
electrified, Sleep Cancel is defaulted.
●Sleep 1 is Sleep mode 1, in Cool modes: sleep status after run for one hour, the main unit setting temperature will increase 1
℃
,
setting temperature increased 2
℃
, the unit will run at this setting temperature; In Heat mode: sleep status after run for one hour,
the setting temperature will decrease 1
℃
, 2 hours, setting temperature will decrease 2
℃
, then the unit will run at this setting
temperature.
●Sleep 2 is sleep mode 2, that is air conditioner will run according to the presetting a group of sleep temperature curve.
●Sleep 3- the sleep curve setting under Sleep mode by DIY:
(1) Under Sleep 3 mode, press "Turbo" button for a long time, remote control enters into user individuation sleep setting status, at
this time, the time of remote control will display "1hour ", the setting temperature "88" will display the corresponding temperature of
last setting sleep curve and blink (The first entering will display according to the initial curve setting value of original factory);
(2) Adjust "+" and "-" button, could change the corresponding setting temperature, after adjusted, press "Trubo "button for confirmation;
(3) At this time, 1hour will be automatically increased at the timer postion on the remote control, (that are "2hours " or "3hours " or
"8hours "), the place of setting temperature "88" will display the corresponding temperature of last setting sleep curve and blink;
(4) Repeat the above step (2)
～
(3) operation, until 8hours temperature setting finished, sleep,curve setting finished, at this time,
the remote control will resume the original timer display;temperature display will resume to original setting temperature.
●Sleep3- the sleep curve setting under Sleep mode by DIY could be inquired:
The user could accord to sleep curve setting method to inquire the presetting sleep curve, enter into user individuation sleep setting
status, but do not change the temperature, press "Turbo" button directly for confirmation.Note: In the above presetting or enquiry
procedure, if continuously within10s, there is no button pressed, the sleep curve setting within 10s, there is no button pressed, the
sleep curve setting status will be automatically quit and resume to display the original displaying. In the presetting or enquiry procedure,
press "ON/OFF" button, "Mode" button, "Timer"button or "Sleep" button, the sleep curve setting or enquiry status will quit similarly.
AUTO
Auto
COOL
DRY
FAN
HEAT*
*Note:Only for models with heating function.
5
FAN
Medium speed
Low-Medium speed
Low speed
High speed
Medium-High speed
6
SWING
OFF
7
I FEEL
8
/
9
SLEEP
(applicable for some models)
