•
It’s defaulted to display set temperature when turning on the unit.
Only for the models with temperature indicator on indoor unit.
12
TURBO
button
•
●
This function is only available for some models.
11
Introduction for buttons on remote controller
10
SLEEP button
Press this button to go into the SLEEP operation mode. Press it again to cancel this
function. This function is available in COOL, HEAT (Only for models with heating
function) to maintain the most comfortable temperature for you.
When selecting " " with remote controller or no display, temperature indicator on indoor
unit displays set temperature; When selecting " " with remote controller, temperature
indicator on indoor unit displays indoor ambient temperature; 3s later or within 3s it
Press this button to activate / deactivate the Turbo function which enables the unit to
reach the preset temperature in the shortest time. In COOL mode, the unit will blow
strong cooling air at super high fan speed. In HEAT mode, the unit will blow strong
heating air at super high fan speed.
14
WiFi button
When WiFi function is turned on, " WiFi " icon will be displayed on the remote
controller; when WiFi function is turned off, " WiFi " icon will disappear.
How to turn on WiFi
：
Press " WiFi " button to turn on WiFi function.
How to turn off WiFi
：
Hold " WiFi " button for 5s to turn off WiFi function.
Under off status, press "MODE" and " WiFi " buttons simultaneously for 1s,
WiFi module will restore factory settings.
receives other remote controller signal that will return to display the setting temperature.
Caution:
•
This model hasn't outdoor ambient temperature display function. While remote controller
can operate " " and indoor unit displays set temperature.
11
TEMP button
Press this button, you can see indoor set temperature, indoor ambient temperature
on indoor unit’s display. The setting on remote controller is selected circularly as below:
no display
13
X-FAN
button
X-FAN function: In COOL or DRY mode, the icon is displayed and the indoor fan
will continue operation for 2 minutes in order to dry the indoor unit even though you
have turned off the unit. After energization, X-FAN OFF is defaulted. X-FAN is not
available in AUTO, FAN or HEAT mode.
function: turn on the display's light and press this button again to turn off the display's
light. If the light is turned on, is displayed. If the light is turned off, disappears.
