25
GB
MAINTENANCE
WARNING! All repair and
extraordinary maintenance
operations must only be carried
out by authorised "TOSINGRAF"
service centres, using original
spare parts and accessories.
ATTENTION! Do not introduce any
kind of liquid in the machine!
This appliance has been designed and manu-
factured to require no special maintenance and
oiling during its life. Thus are no specific op-
erations to be carried out at any time. If you do
not use the appliance for a long time it is rec-
ommend to cover it with a sheet.
For a better and long life of the appliance we
recommend you to clean the appliance with a
damp cloth dipped in a neutral detergent or
alcohol
and under no circumstances
use
strong abrasive agents containing ammonia as
it could cause damage to the machine.
Tosingraf offers special service from equipment
cleaning to maintenance contracts. For further
information please contact the TOSINGRAF lo-
cal service centre or your personal agent/delear.
Changing the plugs of the sheet intaking
system
If problems with the sheets intaking systems
occur, verify the conditions of the plugs of the
intaking device and change them using the
equipment plugs.
In order to change the plugs, disconnect the
machine from the electric circuit, remove the
lower feeding guides (3) and the old plugs if
damaged. Place the new plugs on their seat.
SETTING ASIDE THE OFF-DUTY MACHINE
The symbol represented here above is reported
on the appliance. It indicates that this electric
device is not subject to the generic municipal
solide waste disposal, but it must be disposed
of as differentiated waste.
The waste from electric and electronic equip-
ment requires specific treatment and recovery.
Some electric and electronic equipment or its
components contain substances that are con-
sidered dangerous to the environment and hu-
man health if they are disposed carelessly.
Moreover, it is possible to recycle materials aris-
ing from waste from electric and electronic equip-
ment reducing the waste quantity to be disposed
of and the need to extract more raw materials
for the manufacturing of new products. When
setting aside the off-duty machine, observe the
necessary safety precautions in order to avoid
environmental pollution and damages to peo-
ple:
•
disconnect the machine from the electric
circuit and perform the drain of the residual
energy;
•
provide for the appropriate take-back and
recovery of the waste from electric and
electronic equipment according to the
provisions of Your city.
3
