17
GB
INTRODUCTION
Dear Customer,
thank you for purchasing one of our products TOSINGRAF:
PIEGA TOP OFFICE and PIEGA TOP OFFICE DIG.
This manual describes the main parts of the machine and the recommended procedures for a
correct use.
PURPOSE OF THIS MANUAL
This manual is an integral part of the machine. Read all warnings and instructions very carefully,
as they give important safety precaution and information about the USE AND MAINTENANCE
OF THE PRODUCT. Descriptions and illustrations of this manual are not binding; "TOSINGRAF"
reserves the right to modify this document without a commitment to updating it.
Read the instruction manual carefully for the correct use and before doing any adjustment or
maintenance services. Keep this manual in a safe place so that it will be available for further
reference.
DEFINITIONS
The following graphic and linguistic definitions have been used in this manual:
ATTENTION! This message may appear before some procedure. Failure to
observe the relevant instructions may cause damage to the machine.
WARNING!
This message can appear before some procedure. Failure to
observe the relevant instructions may result in the injury to the operator and
may cause damage to the machine.
SAFETY PRECAUTIONS
Operators must read and follow this manual carefully and familiarise themselves with the correct oper-
ating and maintenance procedures of the appliance.
Failure to observe the rilevant safety rules may result in the injury to the operator and may cause
damage to the machine.
Keep this manual for future reference and to support personnel training. Keep this manual together
with the product in the event that you sell or give it to a new user.
AVVERTENZE
1.
Do not use the machine for any purpose other than that for which it was intended and
designed.
2.
All repair and extraordinary maintenance operations must only be carried out by authorised
"TOSINGRAF" service centres, using original spare parts and accessories.
3.
The machine must only be used indoor.
4.
Before operating the machine, make sure that the voltage and frequency correspond to that
which the machine was designed to work with (see rating plate).
5.
The power cable must be suitably protected and must not obstruct the operator.
6.
Never use the machine if the power cable is defective or damaged in any way.
7.
The socket must be installed near the machine and must be easily accessible.
8.
Never immerse the machine or the power cable into water or any other liquid.
9.
Before starting work remove bracelets, rings, watches and any other personal adornment
that might possible cause an industrial accident. Fasten the cuffs of your work overall’s
sleeve securely around your wrist.
10. Before starting up the machine, make sure that
No
foreign bodies have been accidentally
left in or on the machine.
