22
4.13 DIGITAL IN/OUT PORT WITH 24V DC OUT
Supported models: Lock 210/250, Lock 500 and TOSIBOX
®
600 -series.
The Digital I/O port is equipped with a removable plug-in
connector included in the sales package, for 600 -series
additional IO cable is needed. Remove the connector
if needed and in case of a solid wire simply insert the
stripped signal wire to the correct port opening. In case
a flexible wire is used, press the release button with a flat
blade screwdriver to open the locking springs and insert
the wire. Follow the signal symbols in the front panel and
connect all needed signals. Make sure the connector is
completely plugged in and secure the connector into the
Node frame by tightening the locking screws with a flat
blade screwdriver. The wires with a cross-section of up to
1.5 mm
2
(AWG 16) can be used with the connector. The
stripping length of the conductor is 10 mm. The wire is
released from the connector by pushing the corresponding
release button with a flat blade screwdriver.
4.14 SOFTWARE CONFIGURABLE I/O
Supported models: Lock 210/250, Lock 500 and TOSIBOX
®
600 -series.
The Digital I/O state information and
configuration can be accessed from Settings -> Digital I/O
menu. For signal physical properties, please refer to section
I/O specifications at the end of this manual.
Input port roles can be selected from:
Not selected – no action based on port state
Allow Internet connection – when port voltage is set high,
Node allows Internet connections. When port voltage is set
low, there is no Internet access and the Node visibility is
“offline” for all Keys matched with it.
Prevent Internet connection – when port is set high, Node
prevents Internet connection and the Node visibility is
“offline” for all Keys matched with it. When port voltage is
low, Internet access is allowed.
Allow VPN connections – when port voltage is set high,
Node allows incoming VPN connections from matched
Keys. When port voltage is low, VPN connections are
not allowed and the Node visibility is “offline” for all Keys
matched with it.
Prevent VPN connections – when port is set high, VPN
connections are not allowed and the Node visibility is
“offline” for all Keys matched with it. When port voltage is
low, Node allows incoming VPN connections from matched
Keys.
