Toshiba XDE600KU Owner'S Manual Download Page 13

Page: 13 / 40

Connections

Notes

• If Auto is selected, it follows preference HDMI aspect ratio of TV.
• Refer to the owner’s manual of the connected TV as well.
• When you connect the DVD player to your TV, be sure to turn off the power and unplug both units from the wall outlet before

making any connections.

• If you have a HDMI (with HDCP) equipped monitor or display, you can connect it to this player using a HDMI cable.
• The HDMI connector outputs uncompressed digital video, as well as almost every kind of digital audio that the player is compatible

with, including DVD-Video, Video CD/Super VCD, CD, WMA, MP3 and DivX

• This unit has been designed to be compliant with HDMI (High Defi nition Multimedia Interface) depending on the component

you have connected. Using a HDMI connection may result in unreliable signal transfers.

• Because HDMI is an evolving technology, it is possible that some devices with an HDMI input may not operate properly with

this DVD player.

• When using HDMI cable, do not connect to other analog video outputs.
• No sound will be output from the HDMI cable if the digital out is not set to PCM.
• HDMI output is only available when the Video Out is set to “HDMI”. Otherwise the HDMI button is invalid.

Notes

• DO NOT connect the OPTICAL OUT or COAXIAL DIGITAL AUDIO OUT jack of the DVD player to the AC-3 RF input of a Dolby

Digital Receiver. This input on your A/V Receiver is reserved for Laser disc use only and is incompatible with the OPTICAL
OUT /COAXIAL DIGITAL AUDIO OUT jack of the DVD player.

• Connect the COAXIAL DIGITAL AUDIO OUT jack of the DVD player to the “DIGITAL (COAXIAL)” input of a Receiver or

Processor.

• Connect the OPTICAL OUT jack of the DVD player to the “DIGITAL (OPTICAL)” input of a Receiver or Processor.
• Refer to the owner’s manual of the connected equipment as well.
• When you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the

wall outlet before making any connections.

• The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening

level. Otherwise, the speakers may be damaged by a sudden high volume sound.

• Turn off the amplifi er before you connect or disconnect the DVD player’s power cord. If you leave the amplifi er power on, the

speakers may be damaged.

Connecting to Optional Equipment

You can enjoy high quality dynamic sounds by connecting the DVD player to optional audio equipment.

Warnings

• When you are connecting (via the OPTICAL OUT or

COAXIAL DIGITAL AUDIO OUT jack) an AV decoder that
does not have Dolby Digital, Digital Theater Systems (DTS)
or MPEG2 decoding function, be sure to set “Digital Output”
to “PCM” from the on-screen displays. Otherwise, high volume
sound may damage your hearing as well as the speakers.

• When playing DTS-encoded discs (DVDs and audio CDs),

excessive noise may be output from the analog audio output
jacks. To avoid possible damage to the audio system, you
should take proper precautions when the analog audio output
jacks of the DVD player are connected to an amplifi cation
system. To enjoy DTS Digital Surround™ playback, an
external 5.1 channel DTS Digital Surround™ decoder system
must be connected to the OPTICAL OUT or COAXIAL
DIGITAL AUDIO OUT jack of the DVD player.

• For connection to your TV, see “Connecting to a TV” .
• This section uses the following reference marks.

: Front speaker

: Rear speaker

: Sub woofer

: Center speaker

: Signal fl ow

On-Screen Display Setting

Content of output for each output jack

“Video out”

Setting

HDMI Output

Setting