Toshiba WT310 User Manual Download

Page: 28 / 139

Either a 2-pin or 3-pin adaptor/cord will be included with the computer
depending on the model.

Connect the AC adaptor’s DC output plug to the DC IN 19V jack.

Figure 2-6 Connecting the DC output plug to the computer (laptop mode)

1. DC IN 19V jack

2. DC output plug

Computer appearance depends on the model you purchased.

Figure 2-7 Connecting the DC output plug to the computer (tablet mode)

1. DC IN 19V jack

2. DC output plug

Computer appearance depends on the model you purchased.

Plug the power cord into a live wall outlet - the

Battery

indicator

should glow.

Turning on the power

This section describes how to turn on the power - the

Power

indicator will

then indicate the status. Please refer to the

Power Condition Descriptions

section for more information.

Never keep your body too close to the computer while turning on the
power.

User's Manual

2-8

Summary of Contents for WT310












































































































































Search results

Summary of Contents for WT310

Reviews:

Related manuals for WT310

Brands by name

Popular brands

Toshiba WT310, User Manual

Search results

Summary of Contents for WT310

Reviews:

Related manuals for WT310

Brands by name

Popular brands