TOSHIBA
9 - 10
9.7
PATTERN FREQUENCY GROUP PARAMETERS
FORWARD/REVERSE ROTATION SELECT (ITEM 1) - Use this function to select
between a forward or reverse motor rotation.
PRIORITY OF RR TERMINAL INPUT (ITEM 2) - Use this function to activate the
terminal, either IV or RR, into which the analog reference signal will be input.
MODE FOR PATTERN RUN (ITEM 3) - Use this function to select where the start
command will come from.
TIME UNIT FOR PATTERN RUN TIME SELECT (ITEM 4) - Use this function to select
the time units to be used in the pattern run.
QUANTITY OF PATTERN RUN CYCLES (ITEM 5) - Use this function to setup the
number of times that a pattern run is to be repeated.
PATTERN #1 RUN TIME (ITEM 6) - Use this function to set the run time of the preset
speed frequency SR1.
PATTERN #1 DRIVE CHARACTERISTIC (ITEM 7) - Use this function to select the type
of run for preset speed frequency #1. The selection can be a forward or reverse run,
using either ACC/DEC #1 or ACC/DEC #2.
PATTERN #2 RUN TIME (ITEM 8) - Use this function to set the run time of the preset
speed frequency SR2.
PATTERN #2 DRIVE CHARACTERISTIC (ITEM 9) - Use this function to select the type
of run for preset speed frequency #2. The selection can be a forward or reverse run,
using either ACC/DEC #1 or ACC/DEC #2.
PATTERN #3 RUN TIME (ITEM 10) - Use this function to set the run time of the preset
speed frequency SR3.
PATTERN #3 DRIVE CHARACTERISTIC (ITEM 11) - Use this function to select the type
of run for preset speed frequency #3. The selection can be a forward or reverse run,
using either ACC/DEC #1 or ACC/DEC #2.
PATTERN #4 RUN TIME (ITEM 12) - Use this function to set the run time of the preset
speed frequency SR4.
PATTERN #4 DRIVE CHARACTERISTIC (ITEM 13) - Use this function to select the type
of run for preset speed frequency #4. The selection can be a forward or reverse run,
using either ACC/DEC #1 or ACC/DEC #2.
PATTERN #5 RUN TIME (ITEM 14) - Use this function to set the run time of the preset
speed frequency SR5.
PATTERN #5 DRIVE CHARACTERISTIC (ITEM 15) - Use this function to select the type
of run for preset speed frequency #5. The selection can be a forward or reverse run,
using either ACC/DEC #1 or ACC/DEC #2.
efesotomasyon.com -Toshiba inverter,drive,servo,plc
