Toshiba Tecra M4 Maintenance Manual Download Page 215

Page: 215 / 387

3 Tests and Diagnostics

3.30 SETUP

3-96 [CONFIDENTIAL]

TECRA M4 Maintenance Manual (960-521)

Boot Priority

(a)

Boot Priority

Use this option to set the priority for booting of the computer and the priority
for the HDD for booting.

FDD

→

HDD

→

CD-ROM

→

LAN:

The computer looks for bootable files in

the following order: FDD, HDD, CD-
ROM (*1) and LAN

HDD

→

CD-ROM

→

LAN

→

FDD:

The computer looks for bootable files in
the following order: HDD, CD-ROM,
LAN and FDD.

FDD

→

CD-ROM

→

LAN

→

HDD:

The computer looks for bootable files in

the following order: FDD, CD-ROM,
LAN and HDD.

CD-ROM

→

LAN

→

HDD

→

FDD:

The computer looks for bootable files in

the following order: CD-ROM, LAN,
HDD and FDD.

CD-ROM

→

LAN

→

FDD

→

HDD:

The computer looks for bootable files in
the following order: CD-ROM, LAN,
FDD and HDD.

HDD

→

FDD

→

CD-ROM

→

LAN:

The computer looks for bootable files in
the following order: HDD, FDD, CD-
ROM and LAN. (Default)

NOTE: CD-ROM refers to an Optical drive.

NOTE: When a floppy disc drive is not connected, it boots up from SD memory card

in spite of selecting FDD.

(b)

HDD Priority

Use this option to set the starting method from hard disk drive.

Built-in HDD

→

Second HDD

: Detecting boot command from Built-in HDD first and then second HDD

(Default)

Second HDD

→

Built-in HDD

: Detecting boot command from Second HDD and then Built-in HDD

Built-in HDD

→

Second HDD

→

USB

: The priority is set as Built-in HDD

→

Second HDD

→

USB.

Summary of Contents for Tecra M4




































































































































































































































































































































































































Search results

Summary of Contents for Tecra M4

Reviews:

Related manuals for Tecra M4

Brands by name

Popular brands

Toshiba Tecra M4, Maintenance Manual

Search results

Summary of Contents for Tecra M4

Reviews:

Related manuals for Tecra M4

Brands by name

Popular brands